Resuscitator bags

 Resuscitator bags

Flexo Bag

Single chamber resuscitator bags

Tecno Bag

Double chamber resuscitator bags

Cardiopulmonary resuscitation is one of the fundamental and most delicate moments in an emergency.
Knowledge of operating techniques is an essential basis for saving the lives of many patients in critical situations. In any case, the indispensable prerequisite for therapeutic success is the speed of intervention. It is therefore of critical importance to ensure that the knowledge and practice of these techniques be also extended to auxiliary workers and not confi ned to medical practitioners.

The resuscitator bag is one of the most used systems in cardiopulmonary respiration in an emergency. The system that also consists of face mask or tracheal tube allows ventilation through manual compression by the worker. The bag is complete with a non-return valve that prevents the air exhaled by the patient from fl owing into the bag. It also has a fi tting for connecting to oxygen and a valve for inhalation of room air.

Tecno-Gaz S.p.A. has for many years been a leading company in the manufacture of resuscitator bags, resuscitation sets and sundry accessories.

We can count on a wide range of resuscitator bags able to meet every operating requirement.

Single chamber resuscitator bags

Flexo Bag



Bag valves: Bag models Flexo Bag and Tecno Bag can be fi tted with four types of valve: autoclavable, non-autoclavable, complete with overpressure valve or without overpressure. The purpose of the overpressure valves is to avoid excessive pulmonary ventilation and therefore when there is an overload of air the excess is automatically expelled from this device set at 54 m/bar in the adult version and 42 m/bar in the infant version. The valves of resuscitator bag models Flexo Bag and Tecno Bag are manufactured from transparent polysulfone. The walls are fairly thick to ensure long life and maximum resistance to knocks, even after many sterilizations. The dead space between the silicone valve and the gas outlet is very small, which prevents stagnation of gases so ensuring the maximum protection of the patient. All the connections have been made according to directive EN 1281-1. The internal membranes are made of autoclavable, non-deformable silicone.

Double chamber resuscitator bags

Tecno Bag



Bag valves: Bag models Flexo Bag and Tecno Bag can be fi tted with four types of valve: autoclavable, non-autoclavable, complete with overpressure valve or without overpressure. The purpose of the overpressure valves is to avoid excessive pulmonary ventilation and therefore when there is an overload of air the excess is automatically expelled from this device set at 54 m/bar in the adult version and 42 m/bar in the infant version. The valves of resuscitator bag models Flexo Bag and Tecno Bag are manufactured from transparent polysulfone. The walls are fairly thick to ensure long life and maximum resistance to knocks, even after many sterilizations. The dead space between the silicone valve and the gas outlet is very small, which prevents stagnation of gases so ensuring the maximum protection of the patient. All the connections have been made according to directive EN 1281-1. The internal membranes are made of autoclavable, non-deformable silicone.

This site uses cookies. By continuing to browse the site, you are agreeing to our use of cookies.