-
Packaging
Aim of the process
.jpg)
2165SOne
Thermosealer
2165SOne
Discover
CS002Z01T Paper
Conf. 8 Pz
CS002Z01T Paper
Discover
CS003Z01Rotoli mm 75x200 mt
Conf. 8 Pz.
CS003Z01Rotoli mm 75x200 mt
Discover
CS004Z01Rotoli mm 100x200 mt
Conf. 4 Pz.
CS004Z01Rotoli mm 100x200 mt
Discover
CS005Z01Rotoli mm 150x200 mt
Conf. 4 Pz.
CS005Z01Rotoli mm 150x200 mt
Discover
CS006Z01Rotoli mm 200x200 mt
Conf. 2 Pz.
CS006Z01Rotoli mm 200x200 mt
Discover
CS007Z01Rotoli mm 250x200 mt
Conf. 2 Pz.
CS007Z01Rotoli mm 250x200 mt
Discover
CS008Z01Rotoli mm 300x200 mt
Conf. 2 Pz.
CS008Z01Rotoli mm 300x200 mt
Discover
414S3Rotoli mm 400x200 mt
Conf. 1 Pz.
414S3Rotoli mm 400x200 mt
Discover
CS011Z01Buste Autosigillanti 90x230mm (200 pz per conf)
Scatola da 9 confezioni
CS011Z01Buste Autosigillanti 90x230mm (200 pz per conf)
Discover
CS012Z01Buste Autosigillanti 140x260mm (200 pz per conf)
Scatola da 6 confezioni
CS012Z01Buste Autosigillanti 140x260mm (200 pz per conf)
Discover
CS013Z01Buste Autosigillanti 190x330mm (200 pz.per conf.)
Scatola da 6 confezioni
CS013Z01Buste Autosigillanti 190x330mm (200 pz.per conf.)
Discover
CS014Z01Buste Autosigillanti 300x420mm (200 pz per conf)
Scatola da 4 confezioni
CS014Z01Buste Autosigillanti 300x420mm (200 pz per conf)
Discover
TA010TAUTecno Seal Print
Roll thermosealer with integrated printer and automatic photocell feed system
TA010TAUTecno Seal Print
Discover
TA009TAUTecno Seal
Roll thermosealer with automatic photocell feed system
TA009TAUTecno Seal
Discover
The purpose of packaging is to guarantee that, after sterilization, the devices remain sterile and are protected from contamination that could occur during transport and storage. The load must be packaged in a way that guarantees the removal of air inside the package and allows contact with the sterilizing agent. The materials most commonly used for packaging are: paper-polypropylene laminate.
Paper-polypropylene laminating is preferably used for small devices and allows the contents to be identifi ed. The devices used in surgeries are packed in a single bag while those used for invasive procedures and those intended for operating theatres are packed in a double bag to guarantee use with the “no touch” technique. The paper-polypropylene bags are subjected to positive pressure, and therefore the seal must be at least 10 mm wide so that they do not open during the sterilization cycle.
